Home

Company Profile

Industries we support

Raised Floor Accessories
Display Products

Tubing and hollow profiles

Acrylic Division

New Products

e-mail

RAISED FLOOR ACCESSORIES


Serving the Raised Floor Industry since 1960


Minimum order $100.00

Chester, England, circa 400 AD
No, we didn't install it!


(Side note about this floor)

Lowest Prices in the industry. No fancy brochures or gimmicks. Just fine products and low prices.


And now, our accessories---------

Click on one of the accessories listed below to go to that item or just scroll down till you find what you want.

RAISED FLOOR ACCESSORIES

6" Round Grommet L-MOLDING
5" Round Grommet Corner Clips For L-Molding
4" Round Grommet F-MOLDING
3" Grommet Z-BAR
1-7/8" Round Grommet Tile panel Lifter
4 x 8 Grommet Carpet Lifter-Claw
6 x 6 Perimeter Cutout Wall Tray For lifters
4 x 6 Perimeter Cutout
4 x 4 Perimeter Cutout
4 x 2 Perimeter Cutout
Trim Edge, Pedestal Head Pads, Stringer Covers

All grommets and perimeter cutouts are made from Flame Retardant Polypropylene
that meets Underwriter's Laboratory Standard UL94V-2. Cutout molding and trim edge meets UL94V-0.

6" ROUND GROMMET - P/N: 10317
Quick installation. Cut a 6" hole in floor panel with a hole saw. Firmly press grommet into hole. Crushable ribs hold grommet securely in place. Cap rotates to select 1, 2, 3 or 4 cables.
Standard packaging: 25/box.
1-49 $5.95 ea
50-99 $5.50 ea
100-499 $5.25 ea
500+ $5.05 ea
Back to List of Raised Floor Accessories

5" ROUND GROMMET - P/N: 10236
Quick installation. Cut a 5" hole in floor panel with a hole saw. Firmly press grommet into hole. Crushable ribs hold grommet securely in place. Cap rotates to select 1, 2, 3 or 4 cables.
Standard packaging: 50/box.
1-49 $4.35 ea
50-99 $4.00 ea
100-499 $3.80 ea
500+ $3.65 ea
Back to List of Raised Floor Accessories

4" ROUND GROMMET - P/N: 10000
Quick installation. Cut a 4" hole in floor panel with a hole saw. Firmly press grommet into hole. Cap rotates to select 1, 2, 3 or 4 cables.
Standard packaging: 100/box.
1-49 $3.35 ea
50-99 $3.20 ea
100-499 $3.00 ea
500+ $2.90 ea
Back to List of Raised Floor Accessories

3" Round Grommet - P/N: 10005
Quick Installation. Cut a 3" hole in floor panelwith a hole saw. Firmly press the grommet into the hole. Crushable ribs hold grommet securely in place.
Standard packaging 100 per box.
1-49 $2.45 ea
50-99 $2.20 ea
100-499 $1.95 ea
500+ $1.85 ea
Back to List of Raised Floor Accessories

2" Round Grommet - P/N: 10010
Quick installation. Cut a 2" hole in floor panel with a hole saw. Firmly press press the grommet into the hole. Crushable ribs hold grommet securely in place.
Standard packaging 100 per box.
1-49 $1.75 ea
50-99 $ 1.60 ea
100-499 $ 1.50 ea
500+ $ 1.45 ea
Back to List of Raised Floor Accessories

4 x 8 Grommet - P/N: 10021
Cap has provisions for up to ten cable openings.Use as a large grommet or attach one or two electrical boxes.
Standard packaging 25 per box.
1-24 $8.20 ea
25-99 $7.85 ea
100-399 $7.55 ea
400+ $7.45 ea
Back to list of Raised Floor Accessories

4 x 4 Sq. Grommet - P/N: 10015
Cap has provisions for one, two or three cable openings. Use as a large grommet (equivalent to a 5" round grommet in area) or attach an electrical box. Versatile.
Standard packaging 50 per box.
1-49 $7.60 ea
50-199 $7.35 ea
200-499 $7.15 ea
500+ $7.05 ea
Back to List of Raised Floor Accessories

6 x 6 PERIMETER CUTOUT - P/N: 10764
Ideal for cutouts against a wall or edge of panel. Quick installation. Cut a rough 6" x 6" rectangular opening in the panel. Three #8 sheet metal type screws and it is installed.

1-49 $3.45 ea
50-99 $3.25 ea
100-499 $3.10 ea
 500+ $3.00 ea
Back to Raised Floor Accessories

4 x 6 PERIMETER CUTOUT - P/N: 10049
Ideal for cutouts against a wall or edge of panel. Quick installation. Cut a rough 4" x 6" rectangular opening in the panel. Three #8 sheet metal type screws and it is installed.

1-49 $2.95 ea
50-99 $2.75 ea
100-499 $2.60 ea
 500+ $2.55 ea
Back to Raised Floor Accessories

4 x 4 PERIMETER CUTOUT - P/N: 10312
Ideal for cutouts against a wall or edge of panel. Quick installation. Cut a rough 4" x 4" rectangular opening in the panel. Three #8 sheet metal type screws and it is installed.

1-49 $2.80 ea
50-99 $2.60 ea
100-499 $2.45 ea
500+ $2.35 ea
Back to Raised Floor Accessories

4 x 2 PERIMETER CUTOUT - P/N: 10314
Ideal for cutouts against a wall or edge of panel. Quick installation. Cut a rough 2" x 4" rectangular opening in the panel. Three #8 sheet metal type screws and it is installed.

1-49 $2.70 ea
50-99 $2.55 ea
100-499 $2.45 ea
 500+ $2.40 ea
Back to Raised Floor Accessories

F-Molding - P/N: 10041
Rigid PVC. Urethane or rubber sheet fits into the inner shelf for an air tight and dust free installation.

Packaged 35 pcs. per box, 4 ft. long, 140 ft/box.

1-10 boxes $77.00/box
11-19 boxes $72.80/box
20+ boxes $70.00/box
Back to List of Raised Floor Accessories

L-Molding
Three sizes to fit any panel thickness. Use with corner clips listed below for a fast, professional installation. No mitering required when using corner clips.
Rigid PVC.
4 ft. long.
A:
1-3/16" - P/N:10029
100 pcs/box, 400 ft
1-1/2" - P/N: 10033
75 pcs/box, 300 ft
1-3/4" - P/N: 10037
75 pcs/box, 300 ft
1-5 boxes
$168.00
$132.00
$147.00
6-10 boxes
$160.00
$126.00
$141.00
11+ boxes
$152.00
$120.00
$135.00
25pc/bx
$60.00 (100 ft)
$65.00 (100 ft)
$70.00 (100 ft)
Back to List of Raised Floor Accessories

Corner Clips for L-Molding - P/N: 10045
Use with L-Molding listed above for a fast, professional installation. No mitering required when using corner clips. One #8 drill point screw and it's done.
Standard packaging 100 pcs. or 1,000 pcs. per box.
100 pcs/box: $35.00 (.35 ea)
1,000 pcs/box: $300.00 (.30 ea.)
Back to List of Raised Floor Accessories

Z-BAR - P/N: 10070
Use as cutout molding in seismic active areas to prevent objects from rolling into panel cutouts.

40 pcs/box, 4 ft long 160 ft/box
Meets UL95V-01

1-5 boxes $110.00/box
over 5 boxes $108.00/box
Back to List of Raised Floor Accessories

Pannel Lifter-Double Suction Cup - P/N: 10063
Use for all tile panels.

Heavy duty.
For one or two hand lifting.
Simultaneous trigger release. 24/case.

1-5 $44.00 ea
6-10 $41.00
11-24 $39.00
Multiple case lots, call
Back to List of Raised Floor Accessories

Carpet Panel Lifter- Claw Type - P/N: 10062
For use with any carpet panel.
Positive grip. Locks into carpet.
Easy release.
1-5 $86.00 ea.
6-10 $83.25 ea.
11-24 $81.50 ea.
for over 24, call for pricing
Back to List of Raised Floor Accessories

PANEL LIFTER WALL TRAY - PN: 10078
USE FOR ALL LIFTERS
Fits all Panel Lifters. Easy to install--- just three screws. High Impact Styrene. Two colors: bright safety orange and Putty.
Many localities require wall brackets or trays to store lifters.
$18.00 EA.
Back to list of Raised Floor Accessories



REPLACEMENT TRIM EDGE, PEDESTAL HEAD PADS
AND STRINGER COVERS

IN STOCK!
<
>
A & L Plastics is a component Manufacturer for OEM raised floor companies in the United States and Canada. We also export worldwide. Over the years, we have made trim edge, stringer covers and pedestal head pads for nearly every panel ever built.
We have,in stock,replacement trim edge, pedestal head pads and stringer covers for almost every floor panel ever produced. Send us a sample of what you need matched, in a padded envelope or small box. We will quote you and ship the same day.
Back to List of Raised Floor Accessories

Minimum order $100.00

Home

EMAIL

A&L Plastics Co., Inc., 2 Municipal Road, Newton, NJ 07860
Phone: 973-383-2221 Fax: 973-383-3203
Call Toll Free (888) 385-5031

e-mail: sales@alplastics.com
Rev. 09/16/08
raised floor grommets, raised floors, access floor grommets, access floors, computer floor, computer floor grommets, floor grommets, access floor, grommets, , computer floor, grommets, electrical boxes, grommets, cutout molding, panel lifters, grommets, raised computer floors, grommets, grommets
,